Originally Posted by threedogs
You just got me thinking! Ive got some old salvaged jarra floor boards that'll do the trick nicely
You just got me thinking! Ive got some old salvaged jarra floor boards that'll do the trick nicely
IF YA DONT GET STUCK YA AINT TRYIN HARD ENOUGH........OR YA TOOK THE CHICKEN TRACK
WARNING: TOWBALLS USED WITH SNATCHSTRAPS DO KILL!!
That would work check out some bowie handles some have finger grips that look cool.
use brass 3/16th counter sunk screws ,polished, will look a treat
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
growler2058 (10th January 2014), oncedisturbed (10th January 2014)
Yeah the buck 110's are pricey but a damn good knife. Have some friends on hols in the states at the moment so will see if I can get the to grab me 1.
The 10k jade stone just came in, as big as a box of matches, wish the put the size on the add.
Gonna mess around with it later as me and munchkin are about to start making our Rough Rider knife kits we got for xmas
2009 GU ST 4.8L AUTO WAGON, 2" OME LIFT, 33" A/T'S, ARB DELUXE BAR, WARN XD9000 WINCH, NARVA 170 SPOTTIES, SCRUB BARS / SIDE STEPS, LONG RANGE TANK, DUALL BATTS, REAR DRAWER SYSTEM, ARB AWNING, KAYMAR REAR WHEEL CARRIER, 3" ZORST
www.swat4x4.com
In kit and assembled forms. Awaiting the epoxy resin to dry then we can clean up the pins then sand and polish before sharpening
2009 GU ST 4.8L AUTO WAGON, 2" OME LIFT, 33" A/T'S, ARB DELUXE BAR, WARN XD9000 WINCH, NARVA 170 SPOTTIES, SCRUB BARS / SIDE STEPS, LONG RANGE TANK, DUALL BATTS, REAR DRAWER SYSTEM, ARB AWNING, KAYMAR REAR WHEEL CARRIER, 3" ZORST
www.swat4x4.com
93patrol (12th January 2014), BigRAWesty (10th January 2014), Stropp (10th January 2014), threedogs (11th January 2014)
There looking good mate.
Cheers
Kallen Westbrook
Really interested in this combo.
http://www.ebay.com.au/itm/331096119...84.m1423.l2649
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
Interesting bit of kit
2009 GU ST 4.8L AUTO WAGON, 2" OME LIFT, 33" A/T'S, ARB DELUXE BAR, WARN XD9000 WINCH, NARVA 170 SPOTTIES, SCRUB BARS / SIDE STEPS, LONG RANGE TANK, DUALL BATTS, REAR DRAWER SYSTEM, ARB AWNING, KAYMAR REAR WHEEL CARRIER, 3" ZORST
www.swat4x4.com
Been reading up on Buck Knives which are the ones I've used for donkey years,
they don't depreciate in value if anything they hold it and go up in value.
I should have done this years ago, if you know anything about the dots Buck put on their knives
from 74 to 85 I think that would be great, it makes sense to buck but no one else
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
Knife is not original thought. But still looks the part..
Cheers
Kallen Westbrook
Cool combo 3D. I have seen other saws like that which were useless as there was no set on the blade but that one looks like it has been done correctly.
I have never owned a Buck but have seen the chart where they explain their Dot system.
2006 Ser IV GU, 6.5l TD V8 Chev with 4spd Auto, 3in Lift, 35in Kumho's, 12000lb winch, Nissan snorkel, Diff breathers, lightbar + Lightforce HD spots on roofrack. Built to go bush.
Posting Permissions
Reply With Quote