Other than the 2 extra LEDs on the front what did you do?
Other than the 2 extra LEDs on the front what did you do?
Added a bar to hold the light bar and took the big ass roof rack off...... it's now a streamline rocket ship!!!!!!!!!!!!!!!!
Drewboyaus (12th November 2013), growler2058 (16th November 2013), Hodge (12th November 2013)
The stuff I did to yours was way better. At least with that badge you could tell the world that you prefer the company of other men
1383209891135.jpg
96 GQ coil/Cab
08 G6eT
NissanGQ4.2 (12th November 2013)
Took off the HOOK and replaced with Recovery Points. Noice...
A question for the gurus... What is the wire welded to the locking nut for?? To hold up the shackle, or is it not required???
AJTich
2004 GUIII, white ST, 3.0L manual wagon, NADS,EGT/Boost,Water Temp/Oil Press gauges, drawers, UHF, stubby cooler on the 4WD selector...
"I don't get bogged, I have unplanned 4WD training activities..."
Got a hundred or so dings in it from a golf ball sized plus hail storm :/
Sent from my iPhone using Motorculture mobile app
1998 GU RD28T: RIP
1996 GQ RD28T: RIP 11 days later
Hello 2012 GU CRDZD30
Nissan winchbar + Warn, Dual Battery/Redarc, UHF and Titan rear drawers
Finished cutting out the rust in the floof and welded patches in. Reduced the size of the big arsed mud flaps.
IF YA DONT GET STUCK YA AINT TRYIN HARD ENOUGH........OR YA TOOK THE CHICKEN TRACK
WARNING: TOWBALLS USED WITH SNATCHSTRAPS DO KILL!!
I think you'll find that the kit is made to fit multiple vehicles, one being the GU. There would have been more nuts and bolts than needed. I'm guessing the ones with the wire are for one of the other models so that you could reach in some space (e.g. inside the chassis rail) and hold the nut while you got the bolt onto it. Not certain, but that's what makes sense to me. Certainly my kit had enough "other bits" to get it all bolted up without needing to use the nuts with the wire on them.
Thanks, Cameron
No Patrol now - Just good memories!