OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 10 of 20

Thread: LED Light Bars ARE Legal in QLD

Threaded View

  1. #15
    Hardcore 04OFF's Avatar
    Join Date
    Jan 2011
    Location
    Brisbane,QLD
    Posts
    2,574
    Thanks
    755
    Thanked 2,062 Times in 938 Posts
    Mentioned
    12 Post(s)
    Tagged
    0 Thread(s)
    Interesting.............


    http://www.comlaw.gov.au/Details/F2005L03991





    7.3. DRIVING LAMPS
    7.3.1. Presence: Optional on motor vehicles. Prohibited on trailers.

    7.3.2. Number:

    7.3.2.1. Two or four.

    7.3.2.2. To be used in conjunction with headlamps.

    7.3.3. Arrangement

    No individual specifications

    7.3.4. Position

    7.3.4.1. In width no individual specifications.

    7.3.4.2. In height: no individual specifications.


    7.3.4.3. In length: at the front of the vehicle and fitted in such a way that the light emitted does not cause discomfort to the driver either directly or indirectly through the rear-view mirrors and/or other reflecting surfaces of the vehicle.

    7.3.5. Geometric visibility

    No individual specifications.

    7.3.6. Orientation

    Towards the front.

    7.3.7. Electrical connections

    The driving lamps must be able to be lighted only when the main-beam headlamps switch is in the “lamps on” position.

    7.3.8. Tell tale: No requirement.

    7.3.9. Others

    The aggregate maximum intensity of the main-beam headlamps as specified in paragraph 6.1.9.1 of Appendix A can be exceeded with the fitment and illumination of driving lamps. Driving lamps do not have to comply with ADR 46/….



    6. SUPPLEMENTARY GENERAL REQUIREMENTS

    6.1. Additional lamps




    6.1.1. In addition to the lamps specified in paragraph 5.16 of Appendix A, vehicles may be equipped with those lamps specified in part 7 of this rule.

    6.1.2. Where the installation of equipment or accessories for operational reasons invalidates the compliance of lamps originally fitted in accordance with this vehicle standard, additional lamps must be fitted to maintain compliance.

    6.1.3. Additional direction indicator, hazard warning, stop, parking, end outline marker, rear and front position lamps and rear, front and side retro reflectors may be fitted to satisfy specific safety and operational requirements. These additional lamps shall be fitted as close as possible to the maximum height of the vehicle.

    6.1.4. Where additional lamps referred to in 6.1.3 above are fitted, the maximum height as specified in Appendix A for direction indicator lamps, stop lamps, parking lamps, end outline marker, rear and front position lamps and rear, front and side reflectors does not apply.


    6.1.5. In addition to the main beam headlamps in paragraph 6.1 of Appendix A, a further two or four driving lamps may be installed as long as they comply with paragraph 7.3 of this rule.
    <a href=http://i83.photobucket.com/albums/j320/02ard/PatrolcomAvatar-1-1.jpg target=_blank>http://i83.photobucket.com/albums/j3...Avatar-1-1.jpg</a>

  2. The Following User Says Thank You to 04OFF For This Useful Post:

    MudRunnerTD (6th August 2013)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •