XR6T into GQ conversion

[twase]

I used a scraper from bunnings, the type with the stanley blade in them. i then finished up with grease
and wax remover to get rid of the sticky film. Be very carefull of the rear demister wires with the blade.

[Alitis007]

Warm water with morning fresh in and steel wool but the finer the better, thats how the pros do it unless you have a steam mop!

[burgo88]

Cool thread mate, i was talking about this only today!! keen to hear it go!!

[twase]

Well things have now stopped while I concentrate on things that have been neglected over the last 9 months. Today I placed the Mod plate(sticker) on and that will do for a while.

[BigRAWesty]

Good to hear its on road..

Kallen Westbrook
Owner of
Westy's Accessories

[twase]

Tip to Albury on the weekend, did not miss a beat. Plenty of torque even being strangled with 2" tailpipe and limited to 4psi boost. Averaged around 14.5l/100k's
When its run in and I get some time it will get the boost controller hooked up, the intercooler water plumbed in and a dual 2 1/4" cat back system.

[twase]

Could not be happier with the outcome of this project. The main objective was a tow vehicle. The result is more than I had hoped for. Towed the 18' tandem van up to Sydney and once underway only need 4th and 5th all the way and then only because "do not tow in 5th" was on my mind although it did slip my mind once or twice. Returned an average of 21.1l/100 sitting on 100kph all the way.

[trekster]

Need to hear this thing spooling!!!! Keen for vids


Sent from my iPhone using Motorculture mobile app

[vwace]

OMG. wow what an awesome machine, that must pull really well

[jono995]

would love to see some picks of the dash completed