G'day all,
Started changing out my exhaust to 3" SS job. However nuts on the studs from the turbo which hold the old dump pipe on are siezed to buggery. One sheared off(lucky I have a few spare nuts which fit and there's enough thread left to replace it).
However, the nut in the bottom which is in a really tight spot up against the engine refuses to budge, a breaker bar on the end of the ratchet just rounded off the nut like butter. Before I get really serious and try getting nut splitters in there I thought I might ask: Is it about time to give up, reassemble and take it to an exhaust professional to deal with getting this nut off/ possibly replace the broken stud?