The very first outing in my new GU8 was with AB and he put a stop to it, saying I should really park it, and jump in with him.Originally Posted by lorrieandjas
Hey Jack - put the first scratch in it a couple of days after buying it - but recently the paint and tree branches got intimate so its now striped - goes faster that way I hear!
Jas
Glad I did.
2011 GU8 ST 3.0 CRD, ARB Bullbar with IPF spotties, scrub bars and side steps, Snorkel, Dual Battery system, Waeco fridge, Turbo Timer, ARB Roof Rack with 5 IPF spotties across the front, Custom full Leather Bucket seats, DPchip, 3" Taipan exhaust, ARE Intercooler & scoop, Autron EGT/Boost and dual volt gauges, ARB front locker.
Rewired my winch today and did it properly this time in conduit, much neater this time.
Made up and installed rippers version of Chaz's torque converter lockup kit in.
Not knowing what the I was doing it appears to work.
Thanks guys
------------
2008 GU 3.0 CRD Auto - Life's too short to eat bad food.
And the long range tank.... You must be right in the good books bud
“The best way to cheer yourself is to cheer somebody else up.” - Albert Einstein
------------
2008 GU 3.0 CRD Auto - Life's too short to eat bad food.
Finally took it on a good track to test out the lift and tires. Needless to say I'm so stoked! Trying another one tomorrow!
Tappin trolls
Brendan
If you're following this Patrol, Stop... You're not gonna make it
Still yet to install. Things have come up. Hopefully soon
2011 GU8 ST 3.0 CRD, ARB Bullbar with IPF spotties, scrub bars and side steps, Snorkel, Dual Battery system, Waeco fridge, Turbo Timer, ARB Roof Rack with 5 IPF spotties across the front, Custom full Leather Bucket seats, DPchip, 3" Taipan exhaust, ARE Intercooler & scoop, Autron EGT/Boost and dual volt gauges, ARB front locker.
Oil and filter change.........it should luv me long time now lol
Installed boost gauge into pillar pod and waiting for my new EGT gauge to arrive to plug in
Had another crack at removing the pin striping. Still no success. There is nothing to peel, literally. It rained today so I tried using a clay bar to remove it, got one panel almost removed, took about 30 mins of rubbing with the claybar, but still not 100%. Might have to hit it with a polisher afterwards. Not a fun job....
Installed my drawers from shoreline 4x4, first set that have gone into a GU so a little mucking around but I got there.
Ps the only thing is the fridge slide cannot be locked shut while the drawer is open but I will buy myself a drop down slide anyway to make it easier to get into the fridge.
Last edited by Stropp; 7th April 2013 at 03:06 PM.
threedogs (14th April 2013)
Reply With Quote
