GU Rear Lights Mod

[bushytas]

GU Rear Lights Mod

[bushytas]

OK here’s the easy way to wire in your lights
You will need
5 meters of 5 core trailer wire
2 plugs 5 or 6 pin I used computer power plugs from inside the case OME would be better but no one stocked them here
A soldering iron
A 10mm socket and ratchet
Philips head screwdriver
Flat screwdriver
A knife or wire strippers.
You will be wiring them to the trailer plug it’s the easiest way I know of
NOTE: For reverse lights you will need to use the wire from the reverse light on the left hand side and run the wire across to the driver’s side

5 Core Trailer wire



First step is to remove on either side of the 4wd two 10mm bolts that hold in the lights



After you remove the lights and soldered your plugs on run the wires.



As you will see there is a grommet on either side as shown



This isn’t a neat job but it works





Wire to trailer plug



Wiring for 7 and 12 pin plugs use the colour coding to help with lights



Let me know if you need anymore help or would like me to explain a little bit more with any of this

Cheers
Brendon

[NissanGQ4.2]

Hi mate, have copied you posts to the new Electrical DIY section.

Thought your work deserved its own thread

Original posts can be found here still: http://www.nissanpatrol.com.au/forum...ht-on-GU/page4

Cheers

Todd

[Bloodyaussie]

Now come and do mine!!!!!!!!!!!!!

[CUROUND]

Cool I like this very much, had been checking out the mod's with some one elses GQ and would looooove to do it for my GU or is it DX???

Thanks Bushtas..

Just a thought have you this information on a pdf file. Would very much like to print it out so I can use it to have a go myself...

Cheers

[CUROUND]

OH, forgot to ask, where did you get the aftermarket light's from???

Cheers..

[Clunk]

OH, forgot to ask, where did you get the aftermarket light's from???

Cheers..

Plenty of after market lights can be found on eBay........ And if you wAnt a print off, sa.ve the piccies to your pc, open up a word document and then you can copy and paste the text into that and insert the pics from your pc. You've the got your own copy to print off........ There's probably a better and easier way but maybe one of the computer gurus can help there

[Adventurous]

Just out of interest, what is it about Australian Regulations that has many 4WDs not utilise the 'normal' rear lights?

[MudRunnerTD]

Just out of interest, what is it about Australian Regulations that has many 4WDs not utilise the 'normal' rear lights?

Because the spare tyre is mounted on the door it is considered an obstruction! Go Figure???? you'd think that they would just Add the extra lights to the lower Bumper area and keep the better lights in the side guards as they are clearer and far more visible 99% of the time. Just Dumb!

GQs were the same. but all manufactures have had to do this. Nissan Toyota, Mitsubishi, Holden etc, etc. Silly Law

[Adventurous]

I agree - add more lights!

So I guess the manufacturers removed the higher lights for cost reasons, but it is legal to use them (as long as it is in addition to the lower lights)?