Well, the old AT died so, in went a Wholesale Automatics Extreme with Nomad valve body and bronzed Torque Converter.
The problem with the old one. The (stupid plastic) radiator sprung an internal leak in the tranny cooler section, pressurised the ATF system and mixed water with the ATF, then the AT died (took about two months). The radiator is bypassed for the moment and using the cooler only untill a new aluminium radiator is fitted.
On my GU the breathers are mounted inside the LH guard and can't been seen. Eventually I had a "mud" like liquid throughout the LH wheel arch that smelt and felt of oil but no obvious cause (till now).
So a word of warning to auto drivers with stupid plastic radiators. An internal leak can be EXPENSIVE! Better to spend a grand now than six later.
DSC00535499.JPG DSC00678901.JPG
DSC00632102.JPG DSC00665405.JPG
DSC00509456.JPG DSC00512123.JPG
Now to get back out in the bush ... after I do a bit more work to replenish the toy fund!