Best thing you can do now u have the boost & fuel done is 3" exhaust from Scott's rods & also make sure you fit
An egt gauge to make sure new engine stays good n not to hot .
I have the 97 same engine as you but mine's got 330,000k on the clock, I run 33"x10.5x15 muds 13psi boost
3" exhaust also done the EGR block mod now runs great sits on 7psi at 100k/hr smooth as even when loaded
Up on a trip heaps better with bigger exhaust now.
Got the baby GQ a 1997 2.8TD RX Wagon Racetech EGT & Boost Guages Dobinsons coils 32in BFG KM2 M/T
has anyone upgraded the turbo on this engine?
The 2.8s can be a great motor and produce a decent amount of power with a few mods. one thing to keep in mind is they dont like running hot if the temps start to raise get on to it asap or you will have major problems.
Mod list
1: block the egr valve.
2: 3inch exhaust. and egt gauge
3: snorkel and gu 3ltr airbox and bigger piping from airbox to turbo (2 1/2 inch min)
4: Gu 2.8 intake manifold and top mount intercooler
5: Dyno tune and up the boost.
You can upgrade the turbo with the Gq 2.8 exhaust manifold with any turbo with a t28/25 flange.
thats what i plan to do but cant find the intake or coolers anywhere, its like everyone has bought them lol
i seen a few turbos out there t28 gt28 want to know whats the best turbo to suit what you have done and what i plan on doing