Hi,

I've found that there are two broken wheel nut studs on one of my back wheel hubs, and one broken stud on one of my front wheel hubs.

I just bought the new studs which have splines and it looks like they have to be pressed into the hub.

Just wondering if anyone can tell me how difficult the old ones will be to knock out. I don't have many tools at the moment, and am just wondering if it's a job I'll be able to do in my driveway with basic tools or should I take it to a garage. Can the studs normally be knocked out with a hammer or is a press needed?

Thanks in advance,
Tom