-
25th October 2011, 04:43 AM
#1
Advanced
GQ parts that are compatible with MQ'ss
Can anyone list for me which parts from a GQ will fit straight onto my old MQ?
1980 MQ Patrol
5 inch total lift
355 Stroker V8
37 inch Goodyear MTR's
-
-
25th October 2011 04:43 AM
# ADS
Circuit advertisement
-
26th October 2011, 10:15 PM
#2
Patrol God
wheels, cb, uhf, aerials, side window, seats, head lights. some hubs,
Tim
Getting Older Is Unavoidable, Growing Up Is Optional!
-
-
26th October 2011, 11:43 PM
#3
RIP - valued member and true gentleman of this forum that will be missed by many!
Originally Posted by
Finly Owner
wheels, cb, uhf, aerials, side window, seats, head lights. some hubs,
Tim
given the minimal changes to the body, I wonder whether the bodies, esp early Mavs like Silver would fit reasonably easily?
-
-
27th October 2011, 08:00 PM
#4
Windscreen, front cowl panel (bit under windscreen)
Round 7 " headlights
Front guards, with mods
Front doors,rear doors,wheels,internal window winder handles
Door trims should, havent checked
Bonnet ,altho look the same DO NOT
The hinges are mounted differently
GQ console fits MQ/MK , with minimal mods,ive done it in the ute
-
-
27th October 2011, 09:18 PM
#5
Originally Posted by
Silver
given the minimal changes to the body, I wonder whether the bodies, esp early Mavs like Silver would fit reasonably easily?
I have seen a few GQ wagon bodies on MQ/MK chassis so it can be done. I have not been able to talk to the owners of these vehicles so I don't know how easy it was to do.
Tony
-
The Following User Says Thank You to YNOT For This Useful Post:
Silver (27th October 2011)
-
31st October 2011, 11:25 PM
#6
Patrol God
I nearly sent this answer but the question hadn't been asked. Bugger, beaten again! LOL
Tim
Getting Older Is Unavoidable, Growing Up Is Optional!
-
-
4th November 2011, 11:50 AM
#7
Expert
What about bull bars???
Cheers Michelle
-
-
10th November 2011, 07:26 PM
#8
Originally Posted by
Michelle
What about bull bars???
Cheers Michelle
Depending IF the bullbar mounting brackets are fixed on the bullbar
IF they are removeable and can be modded, sure anything can fit
IF the brackets are fixed to the bullbar as a simple bolt up,no
MQ/MK bullbars are cheap that cheap that i cant give em away, send em to scrappie
-
The Following User Says Thank You to MQ MAD For This Useful Post:
Michelle (15th November 2011)
-
10th November 2011, 10:52 PM
#9
Patrol God
I have a nice polished alloy one for sale Michelle.
Tim
Getting Older Is Unavoidable, Growing Up Is Optional!
-
-
10th November 2011, 11:04 PM
#10
Moderator
I have got a mate that has an MK (Square headlights?) with at 308 conversion including adaptor plate that he is just about to strip. I has a steel bar similar to an ARB GQ bar on it. I have encouraged him to bring the list here when he is ready to strip it, maybe in the next couple of weeks. It has a bit of rust in the body, the conversion was Engineered in NSW and would need to be redone in Vic so unfortunately it is not worth getting it going at this end as its fully out of reg and was bought unregistered and transferred on that basis.
Anyone looking for a 308 Conversion, sing out.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
The Following 2 Users Say Thank You to MudRunnerTD For This Useful Post:
Finly Owner (10th November 2011), Red164 (24th February 2012)