-
3rd September 2010, 12:21 AM
#11
Hi all,
I use 2 x 5L engine oil and a new filter from Nissan and change every 5,000km in my GU IV 3L.
-
-
3rd September 2010 12:21 AM
# ADS
Circuit advertisement
-
10th September 2010, 12:28 PM
#12
Hi,
I use Penrite 15/50 Semi syn in my old 2.8 and she's changed every 5000km on the dot or before.
-
-
10th September 2010, 01:13 PM
#13
Expert
Delo 400 and filters every 5000 K's. Sh'es on 300.000 k's, and probably uses 200ml between changes.
-
-
14th September 2010, 07:19 PM
#14
another vote for delo 400
-
-
15th September 2010, 11:00 PM
#15
Delo 400 again, meets JASO-DH1 which I think is a Nissan specification for oil used in the ZD30?
-
The Following User Says Thank You to Stewart For This Useful Post:
patch697 (15th September 2010)
-
30th September 2010, 01:29 PM
#16
Expert
I’ve been using Mobil1 in 5W50 for the last 100K with a splash of AW10 at 10K intervals. There’s a noticeable improvement in the reduction of cold engine noise but it comes at a cost. Also running some 2T oil in the diesel fuel improved IP noise.
-
-
30th September 2010, 01:56 PM
#17
TRied different brands of oils. At the moment using Nulon 15 40. Sounds sweet and purrs like a kitten. ZD 30
-
-
2nd October 2010, 04:27 PM
#18
yep agree on the castol oil
-
-
2nd October 2010, 08:09 PM
#19
Expert
Originally Posted by
Chaz
I’ve been using Mobil1 in 5W50 for the last 100K with a splash of AW10 at 10K intervals. There’s a noticeable improvement in the reduction of cold engine noise but it comes at a cost. Also running some 2T oil in the diesel fuel improved IP noise.
That 2T's the go hey!!!!!!
-
-
3rd October 2010, 08:24 PM
#20
Expert
Originally Posted by
89GQ
That 2T's the go hey!!!!!!
Yep, good stuff. I've been using it for over a year now and very impressed. You sure notice the difference when you don't use it, particularly when the engine is cold.
-