Clutch slipping after trip at glasshouse, new HD NPC clutch.

[mudski]

Yeah they will never seal water out (being submerged anyway) the way they are from factory. Good idea to silcone the fork boot both ends (bell housing & where the fork goes) and also silicone in the bung on the bottom of the bellhousing. If you remember it's good measure to pull out bung every service or so to check rear main isn't leaking and no water has got in.

Sent from my SM-G930F using Tapatalk

Yeah mines all sealed up with a breather hose in the bell housing. My GU doesn’t have a drain hole too. I think only the GQs had them.


Sent from my iPhone using Tapatalk