Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Ive installed my reversing camera, all is good except for one thing. When I was braking the reverse camera would activate. So put on the multimeter to find that when reverse engaged i get the 12ish volts. But I also get a 1.7v when not in reverse and the brake is applied.
Does that sound normal?
If so, then can I just add resistors or diodes in series to cancel out that small voltage but will let say more then 2v flow so that when reverse is selected it will activate that way