OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 10 of 18

Thread: Sand flags

Threaded View

  1. #10
    Expert
    Join Date
    Sep 2010
    Posts
    160
    Thanks
    0
    Thanked 68 Times in 48 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Here's the one I use. Old 12ft Surf rod that shrunk a foot going under a carport once...... but thats another story....... Aussie flag is cable tied on and the sand flag above is held with Loctite. The rod wedges neatly into the bar and is secured with a couple of cable ties into the uprights, where i drilled 2 4mm holes.



    PS, I have a roll of the material they use for the sand flags so when one dies I just cut another and glue it on. Happy to flick some to you when you are next up
    Last edited by XLR8; 5th January 2011 at 03:38 PM.

  2. The Following User Says Thank You to XLR8 For This Useful Post:

    DX grunt (5th January 2011)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •