Quote Originally Posted by oncedisturbed View Post
I need to look at something similar but would need an aftermarket "Y" frame wiring harness made up to plug into OEM wiring so that the tail lights and the bottom set on my kaymar bar together
You will probably find OD that the factory wiring harness is in place in the guard and all you have to do is pop out the blank lens and you will nearly be a plug and play. The only problem light will be the reverse light as it only works on the Passenger side (go figure!) so you will have to run a single wire over to add the right side to the circuit.

Pretty basic mate. I didi mine on the side of the Murray River while camping nice way to spend an afternoon