I'm Upgrading from my GQ getting old and need some creature comforts, are there any stories or concerns with taking a GU with Auto transmission up to the CAPE, doing water crossings etc? any risk of getting water down the dipstick? Any advise or suggestions appreicated
you can put breathers on the diffs,, transfer case and auto for your piece of mind.
I think Growler just did his
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
Yup just did the breathers
IF YA DONT GET STUCK YA AINT TRYIN HARD ENOUGH........OR YA TOOK THE CHICKEN TRACK
WARNING: TOWBALLS USED WITH SNATCHSTRAPS DO KILL!!
Originally Posted by growler2058
Yup just did the breathers
Looks like the excact same kit that I got... Just that I've only done the diffs at this stage
image.jpg
2008 GU6 3.0 CRD AUTO | Safari Snorkel | 2" Ironman lift kit | Runva 11XP Winch | 33" MTZ's | Full Length Roof Rack | GME TX3200 | 30" LED Light Bar |
growler2058 (11th January 2015)
Tried searching for Growler
"vBulletin Message
Sorry - no matches. Please try some different terms."
Try searching "how the f$&&k do these things go on". You should find his post
Hopefully he sees this and let's you know mate.
I just extended the tnsfr and g/box was easier than replacing the lot. Look here post #230 http://www.nissanpatrol.com.au/forum...rs-GU-DX/page6Looks like the excact same kit that I got... Just that I've only done the diffs at this stage
Last edited by growler2058; 11th January 2015 at 07:53 PM.
IF YA DONT GET STUCK YA AINT TRYIN HARD ENOUGH........OR YA TOOK THE CHICKEN TRACK
WARNING: TOWBALLS USED WITH SNATCHSTRAPS DO KILL!!
Bacho86 (11th January 2015)
Isn't it a good practice to put a loop at the end with the breather facing down to prevent water running down?, that's what I was told and did on my gu
Great idea growler, I was wondering if there was going to be an easier way to connect them up!
2008 GU6 3.0 CRD AUTO | Safari Snorkel | 2" Ironman lift kit | Runva 11XP Winch | 33" MTZ's | Full Length Roof Rack | GME TX3200 | 30" LED Light Bar |
growler2058 (12th January 2015)
I've always wondered the same thing, but 99% of the kits and installation of he filters I've seen are same as Growlers... I guess if your breathers are taking in water, I.e. Your engine bay is full of water you may have bigger issues
I know some of the more expensive kits sell them "water resistant" filters, that are able to delay in the ingress of water but I couldn't justify the cost of this kit
2008 GU6 3.0 CRD AUTO | Safari Snorkel | 2" Ironman lift kit | Runva 11XP Winch | 33" MTZ's | Full Length Roof Rack | GME TX3200 | 30" LED Light Bar |
Posting Permissions
Reply With Quote
