What did you do to your Patrol today!

[Drewboyaus]

Just a rack I built for a local blokes au Ute this year.
Attachment 36757
Attachment 36758
Attachment 36759
Simple shs sides and angle centers for the panel to sit in.
Found these simple tailgate hinges, and set it up that when the panel is down or up the panel is secure between the shs, nut when the struts are removed and panel at 90degrees it can be slid out to place elsewhere.
Gas struts are 90nM kitchen ones, $16 a pair I think..
Good little project..

Looks really good Westy!

[Stropp]

Just a rack I built for a local blokes au Ute this year.
Attachment 36757
Attachment 36758
Attachment 36759
Simple shs sides and angle centers for the panel to sit in.
Found these simple tailgate hinges, and set it up that when the panel is down or up the panel is secure between the shs, nut when the struts are removed and panel at 90degrees it can be slid out to place elsewhere.
Gas struts are 90nM kitchen ones, $16 a pair I think..
Good little project..

yeh westy thats similar to what i am getting done, looks very well built.

[rafa]

Removed the front seats and carpet and centre console so I could install more sound proofing. Found this under the hand brake...

Looks like a WW2 coffee pod

[rafa]

Got a new thingy for the air conditioner under the glovebox, looks like a little radiator. Old one was so blocked, no wonder not getting cold. Absolutely freezing air con now

[Stropp]

Got a new thingy for the air conditioner under the glovebox, looks like a little radiator. Old one was so blocked, no wonder not getting cold. Absolutely freezing air con now

Condenser coil?

[rafa]

Fitted 200L fuel tank in rear Pod.

ImageUploadedByMotorculture1384219632.500948.jpg

ImageUploadedByMotorculture1384219645.414883.jpg

[Ben-e-boy]

Gave it a wash, then sat and looked at it. I have a meeting with an engineer on friday to discuss engineering the long arms, new shock towers, and an antirock sway bar, if I can get these approved it will take the ute to a whole other level in offroad capability and on road handling. I'm trying not to get excited

[Chimo]

Fitted additional rubbers (conveyor belting) above the lower chassis to make up for 25 odd years of wear and compression. No more steel contact and no more noises on slow sharp turns. Seems to work very well. They don't make rubbers like they used too!

Cheers
Chimo

[Bloodyaussie]

I did stuff and I like the way it looks now..

1384237350350.jpg
1384237368156.jpg
1384237385548.jpg

Yeah stuff........

[BigRAWesty]

I did stuff and I like the way it looks now..

1384237350350.jpg
1384237368156.jpg
1384237385548.jpg

Yeah stuff........

Have you tinted the tail lights??