Hey people.
Does anybody know the specs of the gearbox crossmember bolts for a GU? Better yet do you know where I can get some? Nissan stated they are $35 trade each!
Hey people.
Does anybody know the specs of the gearbox crossmember bolts for a GU? Better yet do you know where I can get some? Nissan stated they are $35 trade each!
That is a silly price! Sorry can't help with a price or size. Take 1 out and take it in for sizing. Trust me your gear box won't fall out if you take one out
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.Originally Posted by Rogue Dung Beetle
WARNING: Towballs used for recoveries can, and do kill people and damage property.
I'm pretty sure there m12 metric fine 40mm long
I'll go check
Cheers
Kallen Westbrook
M12 metric fine, 50mm long..
Make sure to get zinc plated..
Cheers
Kallen Westbrook
MudRunnerTD (27th September 2013)
But are GQ and GU the same????
Time is never wasted when your wasted all the time
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Yes I would expect so
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
x2. the use the same chassis. but easy to put a tape on them
Cheers
Kallen Westbrook
Yeah I have two out already. Lol.That is a silly price! Sorry can't help with a price or size. Take 1 out and take it in for sizing. Trust me your gear box won't fall out if you take one out
Thanks mate now I can go on the hunt.
Oh and yes. GQ and GU are the same. It's just a for of habit so I am specific. Will go one better and state nissan wanted to know yeah and engine... Didn't think they made different bolts for different engines lol
My DA Maverick manual has ( in a chart ) bolt sizes and strengths associated with various size bolts.
have a look see in your manual see if ya can find similar.
Also bolt grade numbers (example, 8 ) is usually stamped on end of a hi tensile bolt.
Oh! and never substitute to a lower number.
take a bolt with you to make sure you get the correct pitch.
thats the amount of threads per mm
1, 1.25, 1.5 threads per mm etc
cheers
Last edited by Robo; 28th September 2013 at 12:35 PM.
IF IT'S NOT A NISSAN.
THEN IT'S A COMPROMISE
120-140Nm according to the workshop manual.
The rear Uni joint nuts on the driveshaft are 94-108Nm in case you need this as well.
Posting Permissions
Reply With Quote