tigerz11 bar

[gupatrol]

hi guys has any one brought one of the tigerz11 bullbars for their patrol if so what are your opinions of these bars as i am looking at buying one?

[AB]

How long have they been doing bars for?

Their certainly branching out these days thats for sure!

[gupatrol]

yeah thats for sure $590 including gst and $88.82 freight to parramatta cant go wrong also thinking about the hercules 12000lbs with plasma rope for only $350

[AB]

yeah thats for sure $590 including gst and $88.82 freight to parramatta cant go wrong also thinking about the hercules 12000lbs with plasma rope for only $350

My mate got the Hercules and has used it a few times so far....Thumbs up so far.

[daggy]

Hoping to bump this thread. Tigerz are bringing in a steel bullbar for the GUIV and I'm interesed in comments from any person that has a Tigerz bullbar on any model. They are at a great price and look the goods on fleabay photo, but no photos of the mounts.

[mudski]

Going by the quality of their roof racks and awnings, I wouldn't be touching it with a 100ft pole. A trusting it too..

[Thirsty]

I've seen 2 and both of them were starting to rust already around the welds.

[Patrol94]

I've also seen one on a mates hilux and looked good on there but after not very long started to rust around the mounts and paint scratched quite easy may be ok for the price but still not as good a quality as others ie tjm, arb. But for less than half the price could justify it. I am looking to get one of there winches tho.

[megatexture]

for that price id buy one and spray it with some 2pac before fitting it

[mudski]

The steel used is probably made from plasticine. I'd be very wary of putting any stress on that bar. I would buy a second hand ARB or TJM and get it repainted or powder coated. Atleast you will know of the build quality.