-
12th March 2012, 12:37 PM
#1
Advanced
lift laws in vic
hi everybody im still in the dark as to the lift laws in vic i know they wonted to bring in there stupid laws with the 2 inch mods but has it been done???? have they even passed the laws on lift kits or are we still on the drawing board >???i still see loads of hi lifted Nissan's and other 4x4s getting round have they passed this law please no links i don't understand them / just a simple yes you can lift yu car or no you Carnot wood help heaps but only if you no wot is wot thx
-
-
12th March 2012 12:37 PM
# ADS
Circuit advertisement
-
12th March 2012, 01:46 PM
#2
The Mad Ozzy
Check with local authority and the new VSB 14 which came in on the 1st jan this year
2009 GU ST 4.8L AUTO WAGON, 2" OME LIFT, 33" A/T'S, ARB DELUXE BAR, WARN XD9000 WINCH, NARVA 170 SPOTTIES, SCRUB BARS / SIDE STEPS, LONG RANGE TANK, DUALL BATTS, REAR DRAWER SYSTEM, ARB AWNING, KAYMAR REAR WHEEL CARRIER, 3" ZORST
www.swat4x4.com
-
-
12th March 2012, 07:20 PM
#3
Administrator
http://www.nissanpatrol.com.au/forum...oria+lift+laws
This link above should help but there is another thread in this forum somewhere with the latest news in Victoria. I'll try and find it for you.
-
The Following User Says Thank You to AB For This Useful Post:
madchris (12th March 2012)
-
12th March 2012, 10:49 PM
#4
Expert
see page 7 of this doc
http://www.vicroads.vic.gov.au/NR/rd...orvehicles.pdf
50mm spring lift and 50mm larger diameter tyres, without engineers cert, what ever you can talk and engineer into signing off on with cert...
-
-
14th March 2012, 08:25 PM
#5
Advanced
Hi guys,
At my 4wheel drive group (citywest 4x4 club ) plug, they were saying there is a newer version of regs coming in. It is still be worked on but it will have changes including, no fishing rod holders on your bull bar and no projections out the front of your bar
John
2011 ST Patrol, ARB bull bar with Tigerz11 winch and IPF spotlights. Snorkel, UHF Radio. ARB air compressor and a front locker. Dual battery, Diff Breathers and 2" OME lift and 16" Black Dynamic Steel rims with muddies
-
-
16th March 2012, 08:32 PM
#6
Advanced
the fishing rod one has been round for ages but if they can be turned upright i think there ok im more worried about the lift they make these lifts to improve our 4x4ing and then some swanker that has probably never owned one and drives a Minniemoke says they are too high well there are hundreds of people out there with over a 2 inch lif y dont we all go to Canberra and park on there lawns and protest people power is whot it needs i for one wont a 3 to 4 inch lift tired of being told no without good reasoning
-
-
16th March 2012, 08:55 PM
#7
Rotaredom
Originally Posted by
madchris
hi everybody im still in the dark as to the lift laws in vic i know they wonted to bring in there stupid laws with the 2 inch mods but has it been done???? have they even passed the laws on lift kits or are we still on the drawing board >???i still see loads of hi lifted Nissan's and other 4x4s getting round have they passed this law
please no links i don't understand them / just a simple yes you can lift yu car or no you Carnot wood help heaps but only if you no wot is wot thx
madchris, there is no simple yes or no when it comes 2 governing laws in regards 2 vehicle modifications.
As far as I am aware, Yes you can legally lift it yourself / 4wd shop 50mm total only
Anything over that will require it 2 be certified.
In regards 2 seeing other lifted four wheel drives getting around and have they passed this law........probable not, most do not get there lifts certified. I drove around with my 4inch suspension lift and 2 inch body lift for years and never was picked up for it.
The laws have always been there, but not really enforced..........
Cheers
Todd
P:S. The last I have heard is found here: http://www.nissanpatrol.com.au/forum...light=victoria
You have already read the thread.
Time is never wasted when your wasted all the time
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-