OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 1 of 1

Thread: Center Console Fascia removal / Radio removal simplified pictorial version

  1. #1
    Patrol Freak Bidja's Avatar
    Join Date
    Jul 2017
    Location
    Southern Table Lands, NSW
    Posts
    1,113
    Thanks
    1,217
    Thanked 1,031 Times in 579 Posts
    Mentioned
    40 Post(s)
    Tagged
    1 Thread(s)

    Center Console Fascia removal / Radio removal simplified pictorial version

    Removal of the center console fascia GUIV and later _ how much later not sure.

    Was asked how to access radio so knocked this up and may help others.

    To remove center fascia:

    Step 1 _ First unscrew the two Phillips Head Screws.

    Step 2 _ Grasp top parcel shelf and pull back towards yourself (give it a bit of a gentle tug) _ will unclip from top/removed.

    Step 3 _ Can remove the two harness connectors (side clip depress and pull out).

    Step 4 _ Put aside then remove the 4 Phillips Screw Holding the Radio in place and remove unit / unplug.

    To replace _ reverse order.

    For Fascia replacement:

    Step 5 - First align/nest bottom edge in position then apply hand pressure to top area.

    Step 6 - Push Top of fascia back in place then refit the two fastener screws.

    Step 7 _ Back in Place.
    Attached Images Attached Images
    Last edited by Bidja; 19th June 2024 at 12:48 PM.
    2008 GU WAG ST Manual CRD - To do the job

  2. The Following 2 Users Say Thank You to Bidja For This Useful Post:

    BrazilianY60 (20th June 2024), mudski (19th June 2024)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •