-
13th August 2012, 07:33 PM
#1
Advanced
Intercooler cleaned
Being a mechanical gimp, I get a good deal of satisfaction completing simple mechanical tasks. Anyway, today I removed and cleaned the intercooler on my GU. It appeared to be dirty but that's only a guess because I had nothing to compare it to. The fins had some crap in them but nothing drastic, but of more concern was some oil residue on the exterior surface near the outlet. I cleaned that off and will check it from time to time.
Next job will be to put in a catch can.
-
-
13th August 2012 07:33 PM
# ADS
Circuit advertisement
-
13th August 2012, 07:38 PM
#2
Hardcore
With a bit of luck, it's only a loose hose clamp!!!
Cheers, the ferret.
-
-
13th August 2012, 07:50 PM
#3
Patrol God
After fitting the catch can you'll notice a big difference, did with mine.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
14th August 2012, 02:01 PM
#4
Advanced
Dawes Valve and Provent 200 on the way. Next is the Boost and EGT gauges. Is there a specific brand I should look for or are they all much of a muchness?
-
-
14th August 2012, 04:06 PM
#5
gauges
Originally Posted by
Fiftynow
Dawes Valve and Provent 200 on the way. Next is the Boost and EGT gauges. Is there a specific brand I should look for or are they all much of a muchness?
i went AuberIns EGT and BOOST (http://auberins.com/) from advice from these forums.
Digital readout and can set min/max + alarms.
From the US but arrived within 3 weeks.
These are non-pillar mount
-
The Following User Says Thank You to schanmala For This Useful Post:
Fiftynow (15th August 2012)