-
19th July 2012, 04:19 PM
#1
Drawer sliders
Hi guys ginna be making drawer system this weekend for my GU, I won't the draws the go the full length of the rear ( to back of rear seats), was just wondering what length runners I would need, and if anyone in Perth sells heavy duty ones??
Cheers!!
-
-
19th July 2012 04:19 PM
# ADS
Circuit advertisement
-
19th July 2012, 05:31 PM
#2
Moderator
Try your local Metal Land if you have them out West? or look on Ebay.
In relation to the length? just remember that your interested in the closed and Open length. your drawers dont need to fully open though as some should be left in the car. I have Black Widow Drawers and they leave a good 300mm in the car when fully open.
Take heaps of pics mate
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
-
19th July 2012, 05:39 PM
#3
The longest I can get at the moment is 550mm, without trying get some posted!
but I feel that I'll need longer! The draw will be 1000mm long!!
-
-
19th July 2012, 11:16 PM
#4
Beginner
Hey mate,
If your desperate for them most bunnings sell them for a massively inflated price. You'll be looking at paying $300+ for a set of 800mm runners
If you can wait eBay has them much cheaper. There is a range of sizes and styles. Not sure I that helps but if u can wait u can save a fair bit of ca$h.
800mm Drawer Runners/Fridge Slides Heavy Duty -100kg - 4WD Workvans Workshops
http://bit.ly/MLcbqO
-
-
19th July 2012, 11:35 PM
#5
Advanced
I just built some drawers for my GU and used 550mm runners from Bunnings @$29 bucks a pair. Seem very solid and allow the drawers to open almost all the way. I made the drawers a snug fit so by not opening the last 150mm or so, there is not a lot of weight on the runners as the back of the drawers are holding some weight. I'm really happy with them.
98 GU 2.8TD - 3" Tough Dog Adjustables, MTZs on Black Dynamics, HID Conversion, IPF Xtremes, LED Bar, LED Sides and Rears, 12000lb Winch, Custom Drawers w/LEDs, Catch Can, Dual Batts, Black Widow Rack, Speedbox Chip, Tough Clutch, UHF, VMS 700hd.
I always win. Except when I lose, but then I just don't count it.
-
-
20th July 2012, 02:47 PM
#6
Galvin hardware in Osborne park!! Has all the sizes and in heavy duty!!
-
-
28th August 2012, 10:23 AM
#7
Beginner
UES International in Malaga does 125kg rated slides in sizes upto 1000mm extension for sub $150 a pair.
-