Search:

Hey, I have been struggling with looking for new posts, always clicking the 'new post button' but tried the 'whats new' tab on the scroll bar and the latests posts come up wish I knew about this...

Every time or just first in the day? I am wondering if your handbrake shoes are dragging?

Ok next on the list is the roof awning extension plates, then the gearbox shifter top plate and brass bush upgrade, followed by 30mm spacers on top of rear springs, I am looking at what junk I can...

I used it today to reinstall the under tray side boxes and wash a benefit for sure, awkward bolt positions and had to swing a spanner. Happy with the set for sure

Ok I did a Google search for the fuse and it was wrong, the feed to the reverse lights is off the 10amp fuse feeding the dash lights, so logical. Anyway the issue turned out to be a broken leg of the...

Well another day on the ground and chasing wires. Got everything back together, found the constant voltage culprit was a faulty stop pedal switch, which I had already bought to try and resolve the...

Times change, people move on, but I hear you

You could be right as it's possible in peak hour congestion I guess for dozens of stop start. Having said that the battery guy we got out for the wife's car mentioned batteries are being installed...

This is why I have the 4 lamas to do the recharge - not even going to feed 'em.

The charge time is 4 hrs on a 5V USB supply and 1 hr on a 12V alternator supply from flat, or so the claim is. I hooked it up today in its as delivered state and on the car charger clamped to the...

Good luck and welcome to the forum. Cheapest thing you have bought is the car, now its a money pit moving forward!

Are you trying to be clever? I have a wire cage with lamas rotating around an alternator stator o ensure they stay both warm and the camp has lights. I am a solution provider.

I have flogged all my socket sets into the weeds with this conversion, and constantly get hampered with access to nuts and bolts and no room to actually swing a socket, so found this product which is...

Couple more upgrades. Billet gearbox shifter plate and machined brass shifter bush. The shifter is a bit notchy especially going into 5th. Its also a little sloppy in the 3 to 2 shift downwards,...

I am looking at a snow trip, usually base camp for a couple of days or 3, deep in the snow. I am always concerned about battery voltage and starting in the sub zero tempos especially when everything...