Is there actually a way to check the state of the prop without dismantling it?
Type: Posts; User: poddy
Is there actually a way to check the state of the prop without dismantling it?
Hey mate, any news? How'd you go?
I see what you're saying; What if I was to use a copper washer that fits and torque them high pressure lines to spec, that should do the trick, no?
I believe it can easily be that high.
If you pay someone else to do it for you (like a service centre)
If you use the genuine Nissan set of injectors (cheapest genuine Nissan part I found was...
So is it not a thing anymore? Like, back in the good old days, I was able to remove the injectors off the engine, take them to a shop where they plugged them into their ultra-sound machine, run some...
3.0 DDTI injector service gotchas
It's a 2008 3.0 with CRD
Been thinking about taking out the fuel injectors and then having them taken to a shop to get them serviced.
I am allways on a budget.
I am searching on them...
And also big thanks to everyone that chipped in this thread. Problem sorted. I re-edited the first post with the resolution. :clapping:
thanks mate.
Hey mate, did you order this from the States? And was it just straight plug in, no tinkering required?
Which one is the FPRV actually? Is it #2 or #4 on the picture above?
It's not the glow plugs; I've swapped the set and nothing changed. Not a damn thing. But yea, I see where you were coming from. 2 were no good anyway, sothat would have to be done anyway. Thank you...
Yes you did, and thank you for that Mr. Fireblade. I'm just slow with execution. Only just got the plugs delivered today, didn't get around to swap them yet. Then I move on. I appreciate the help...
Looks interesting. Do you know if it can read the air intake pressure?
Just out of curiosity, when I was pulling the plugs out on the weekend, to check them, they were screwed in pretty loose. I mean, it took no effort to undo them from the block.
The manual says...
thanks everyone, I've got the glow plugs on the way, will start with that; Like I mentioned earlier, I already found 1 is cactus (10.52Mohm); I've got a set coming in today, so I will swap them out -...