Search:

mudski

Being a horse owner mate and transporting them around a bit myself. Seeing the condition of that is a little alarming. There is one more major part of that float I would be thoroughly...

Apart from the above, the new Y62 has variable intake and exhaust valve timing. Find some really smart guy who can tune this, as in break into the ecu and just program the timing so it's sounds as...

Yeah 3rd can be a problem with warmed up higher torque TD's. Some guys like the 4.8 manual as 3rd is a little shorter than the TD specific box.

Yep. How to make a butt load more money than I do.....

Meguirs tyre gel. You can vary the shine with application. Stays on for ages too.

Yep. All the optus and medibank ones are available on the dark Web....

One of the companies I work for (my boss owns 2) sells bullbars. We advertise in 4x4 australia and NZ 4wd. The cost is ridiculous for the outcome which isn't much. Unfortunately Social media is king...

You know your alive in a 4.5. Lol

I have seen plenty let go MB. My comment was in the way in which Winnie's has failed. Normally they break relatively cleanly. Winnies one has like twisted and splintered.

Yep. That is a phenomenal failure. Can't say I have seen a rod let go like that before.

If you know the thread pitch of you tie rod ends then this is quite easy. For example if the tie rod ends have a 1mm pitch then 1/2 a turn would equal approximately 1mm off your measurement....

Just backwards working the numbers. The spec says -2mm to 0mm for the toe. It also states that this is 0-9°. So if 0mm is 0° the -2mm is 9°. Then I just divide that into 20 points so 1 point is...

You still have castor. So the position of the tyres sitting at ride height will be different when the suspension is drooped. If castor didn't exist then you would be fine.

But yes you are close....

The spec is a measurement Daz. It's -2mm to 0mm. This equates to anything from 0-9°.

You also need to be doing the measurement witht the vehicle on the ground. As it will be different on the...

There are insulated posts you can bolt on as well as bus bar types. Either gets the mess away from the battery post.

8597085971