Search:

Happens a lot with aftermark boxes and snorkels. Not a great deal of aftermarket boxes come with drains in them.

Do you have a ram head on the snorkel?

Dare I say it but it's a very similar red to the Toyota. Can get the prado and hilux in it.

mudski

Being a horse owner mate and transporting them around a bit myself. Seeing the condition of that is a little alarming. There is one more major part of that float I would be thoroughly...

Apart from the above, the new Y62 has variable intake and exhaust valve timing. Find some really smart guy who can tune this, as in break into the ecu and just program the timing so it's sounds as...

Hey Plassy.

Munji 4x4 do some really nice composite ones for a lot of models. I know they were going to do a set for the y62. Give them a call and see if they are available yet. Have a look on...

Yeah 3rd can be a problem with warmed up higher torque TD's. Some guys like the 4.8 manual as 3rd is a little shorter than the TD specific box.

The colour of that is not good. The orange tinge is hinting something could be up. It's pretty common for it to be that colour when say 3rd or 5th gear is on its way out. Have you had any issues with...

Ok. I have seen engines tick when the rings were tight in their lands after a rebuild. Could be something worth checking.

What spec is the injector pump timing set at?

Who rebuilt the engine?

Awesome thanks Matteye!

PS is there anything you DON'T know?? :D

Yep. How to make a butt load more money than I do.....

Meguirs tyre gel. You can vary the shine with application. Stays on for ages too.

Wonder how much under the table coin it would cost to have Toyoda’s data base working young guru sell your boss mudski their ERP system details for the last 5 years to target email chimpy the lot of...

One of the companies I work for (my boss owns 2) sells bullbars. We advertise in 4x4 australia and NZ 4wd. The cost is ridiculous for the outcome which isn't much. Unfortunately Social media is king...

You know your alive in a 4.5. Lol

Oh god, now I want a TB!

.......from under the great down under.

Yeah a TB48. Never late in a 4.8

Please Mat Mate & Brother [emoji3590][emoji3590][emoji106][emoji106]
Every TD42 that I’ve merely known pushed to limits have popped….poor Blokes are still paying for it [emoji22]


Sent from my...

Hmmm think you win Winnie. .[emoji1787]

Sent from my SM-G781B using Tapatalk

Yep. That is a phenomenal failure. Can't say I have seen a rod let go like that before.

Do you have a laser distance finder/measuring device? Possibly at work.

Thanks mate, that's what I was looking for. I will drop it on the ground and try and get it to 2mm. Measuring off treads alone with a tape measure there is almost certainly 1mm in it.

If you know...

I have absolutely no comprehension of these figures Matt, 13.5 degrees of what equals 3mm?

But this is not my thread so ignore if I am an ignoramus.

Just backwards working the numbers. The spec...

But?? It's the GQ. Suspension will have nothing to do with surely??? A solid front Axle has a controlled fixed length?

But another note though, so my 3mm is plenty? Too much even? It's 1.5mm per...

The spec is a measurement Daz. It's -2mm to 0mm. This equates to anything from 0-9°.

You also need to be doing the measurement witht the vehicle on the ground. As it will be different on the...

There are insulated posts you can bolt on as well as bus bar types. Either gets the mess away from the battery post.

8597085971

I dont reckon we will see a y63 until 2024 at the absolute earliest. I reckon they are gauging the market with the 300 series and will hopefully be eagerly preparing something that will better the...

What about Nitto Mud Grapplers?