Search:

Funny you say this, I have been trawling for some stats on just this but not much love.

4BYE4 is on the money too.

Had to be at least one fool.

The main issue with the ZD30's is the weakish pistons. Rest of the motors are quite strong and the factory turbo can handle a lot of boost (30+PSI).
The pistons would either blow through (hole in...

Depends of the pistons used (rebuilt donk for grunt likely to have non-stock pistons) and the cylinder volume.

If you wan't a reliable Outbacker to carry spares, loose the RB30 and run a TB42 or...

A small battery to provide exciter power to get the field energised, after running and producing power then it could be run standalone but regulation will be shit. Use a battery on it (just a little...

I am assuming an RB30 looking at the manifold and your signature.....?


Anyway, RB30 has a pretty strong bottom end, heads are ordinary but workable but even better, Stronger guts are not hard to...

Dump pipe off and check shaft play. If it wobbles, she is farked.

P.S If it is farked, you are putting metal shavings into the motor.

The alternator doesn't settle @ 13.8V, the is the resting voltage of a healthy battery, not its charge.
I will say it again, sense wire should be a the Batt+ terminal, not on a amplifier or other...

The "Sense" wire is designed to be connected directly to the battery or as close as possible. The reasoning for it is to ensure the correct voltage is at the battery overcoming any volt-drop (Vd) and...

Evil creatures for lazy people. Strip, solder and tape/heatshrink.

Dude, I don't even know what thread or where it is, there are serious way too many forums to keep track of on the site...

The factory suckers are in tighter than a nun's nasty. We used a lot of heat, bearing pullers and big hammers (use one a dolly to put mass behind bar, use other smaller hammer to smack the sucker) to...

Might pay to look at my Turbo & Exhaust wrapping thread.

I don't have a CRD nor worked on one. I have noted other in past finding total external boost control can make limp-mode hell along with possible de-rating power. This would be best answered by those...

As I say to any of my business clients, if you use the machine as a tool and it going down will impact your business, then leave it alone. If it is running Windows 7 or 8.1 and working fine, leave it...