Search:

Hi all, I have a high flow Iron Man compressor that I bought back in 2018. A year ago I bought a set of Indeflate lines to inflate all 4 tyres at the same time. Well .. slow as a wet weekend. Took...

If it helps .. I went down the ironman 2 inch lift springs with foam shocks for my 2013 Y61 wagon. Never, ever had a good ride with them. Changed out to Toughdog 2 inch lift springs and kept the foam...

It also depends on what ability the car has to be tuned via OBD. Just because it has an OBD connection, it doesn't mean it can be used for everything. I just use OBD link and I can access everything...

For those interested in the above intercooler and scoop. I have had between 80 and 100 degrees drop in EGT's since fitting in both around town and highway travelling. It was one of the hottest days...

Well last service found an intercooler leak from the fins. Looking around for an intercooler that is larger in depth and will fit the existing space (like the...

the threaded rod I bought was enough to make 3 mounting points (2 from the rear seat anchors and one at towards the front (seen on the left hand side. Aluminium angle was used to give a mounting...

This is how it all turned out.
8813088131

I got a SM 8.8 that fits perfectly but need threaded rod. Doesn't have to be high tensile at all .. it's what is available that I will have to find out.

I will just clear that up - go through both pre existing holes in the arch.

Na mine are a finer thread. I assume due to being a seat anchor. I want some threaded rod to go through both to mount a marine ply floor to go between the side of the car and my Ridge fridge cage. I...

Thanks for that :-)

Nope not M10 1.25 pitch. Mine are a fine thread.

Hi all, does anybody know what the 3rd row seat bolt threads are? The ones that go into the wheel arch.

and links will not open

Nope, didn't work .. this is what I get87559