Search:

Well, since I am not quite sure what level of vibration you are talking about, let me throw a different approach to this, as it happens from time to time in my 4bys.
In my experience, from time to...

I assure you, as a machine operator my electrical work doesn't deserve photos

I had this sitting in a box for a couple of years forgotten about, put it in over the weekend along with the new alternator.

I like the idea of a smoother inlet path, and it tidy's up the engine...

Hi all, I have a high flow Iron Man compressor that I bought back in 2018. A year ago I bought a set of Indeflate lines to inflate all 4 tyres at the same time. Well .. slow as a wet weekend. Took...

Look up Magnum flexplates. They do a heavy duty item for the T engine with the bigger PCD.

Edit: Should have written that Magnum can make a standard flexplate for the non-T engine which is what...

I gave them a message we will see what they say but if anyone else knows on here that would be also very great

There was a nun having a bath when there was a knock at the door.
Shes a bit worries so shouts out loud "who is it".
And he says "its the blind man"
Come in she says.
As he walks in he says 'nice...

I'm cautiously optimistic that the new rad cap has solved my issue. Did a 120K drive this morning and everything looks to be back to normal. BTW. The temp gauge on the dash is useless. If I didn't...

I have triple batteries

starter + aux under bonnet (both lead-calcium)

Victron 75/15 mppt + 200w solar panel to achieve voltages above alternator output which is required for lead-calcium...

This is a very old thread, so you might not get a reply. The way I would do it is to pop rivet some temporary struts diagonally on the inside metal work to the floor. Then do the cut and weld on the...

Hi there

New to the forum...have just bought a white ST GQ, 1991 model with the mighty silvertop TD42.

Its going to be a fun project for my son and I to work on together.

Cheers, Chris

Latest Blog just posted.

King River Road, Diggers Rest Station, Karunjie Track, Duncan Road, Langi Crossing & now we are on the Gibb River Road heading eastward to Mr Elizabeth Station where we'll...

Yeah my TD is at 700rpm. As for the dash issue even though its fixed, look closely at the pcb on the back. I have read that sometimes the solder lets go and creates issues like you have had. The...

Yet to buy and replace engine and transmission mounts, but some update: my rev counter on the dash only worked when it wanted and I have gone through the trouble of tracing all the harness down to...

Well the 1st time we used it was at greens lake with mudnut, percey and tpc and it was windy, but it held up well. Haven't done snow yet and it had one of the better warranties..

You can spend up...