Search:

You sure got good life out of that clutch!

I am here, maybe clock in a couple of times a day, however the 'latest posts ' functionality is hit and miss most of the time' as mentioned.

Forum content is decreasing it seems especially in...

I am here, maybe clock in a couple of times a day, however the 'latest posts ' functionality is hit and miss most of the time' as mentioned.

Forum content is decreasing it seems especially in...

OK, reliability testing continues. The little green plastic knob battery post isolator, brass on brass decided to shit itself on the way back from the High Country on friday, finally fell apart 500m...

This mornings post disappeared, so here is the second pass. I raised the rear of the canopy by 12mm on the rear mount, 6mm on the centre and its essentially 'spirit level flat'. Took about 6 hrs...

They are not that difficult to install, they are held in place with small screws at the top and press into position - or at least that what I recall on the GQ.

Passenger side stiffener plate fabricated and installed, slightly shorter due to the cross bar mount, finished it off with the body deadener, yeah came up the same as previous, more cosmetic work to...

Do yourself a favour and check any rubber hoses first as a vehicle of that age is likely to have perished hoses as well.

If the pulley is on the pump, which is being driven, by the belt off the engine, going up in diameter will slow the pump down. It also will change the belt length as the circumference of the pulley...

https://www.nissanpatrol.com.au/forums/forumdisplay.php?54-Nissan-Patrol-Manuals-Nissan-Patrol-Software

in the form section down the page

Started on the drivers side rear chassis stiffener plate. Its 200 x 6, welded to the outside of the chassis rail via dia 50mm hole saw holes, at both ends and stitched along the top. I will stitch...

I dont think the 25 posts is still a requirement.

This is a family orientated forum so your opening title is inappropriate to be honest - surprised it has not been redacted as yet.

There is a...

I is here, running out of space to do much on the truck now it has busted the magic 7T mark, however I will persevere and report the activities as they explode into the next folly

Sounds like a first world problem we as society should look to improve upon.

Many thanks very detailed, I will have a look at it soon.