OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

Search:

Page 1 of 40 1 2 3 4

Search: Search took 1.00 seconds.

  1. Replies
    47
    Views
    2,272

    Yes bleed it. Due to its operation and position...

    Yes bleed it. Due to its operation and position it is best practice to bleed.
  2. It will if the engines gets lent on. The holley...

    It will if the engines gets lent on. The holley may not produce enough volume. It will be enough for the current application. For a warmed over TD I would use a carter 4601.
  3. You want a pump that has high flow and 6-14psi of...

    You want a pump that has high flow and 6-14psi of pressure. So anything like has been suggested, carter 4600 or 4601, Holly red etc etc. All these suggested ones will work with most fuels. Apart from...
  4. Will always have fumes. But the filler cap isn't...

    Will always have fumes. But the filler cap isn't even bouncing around so looks good.
  5. With everything you have said I would be looking...

    With everything you have said I would be looking at the fuel pump and injectors. I wouldn't be stressing on an engine rebuild with those compression results. I mean you could maybe do a bearing roll...
  6. MB Did you get this looked at yesterday or is...

    MB
    Did you get this looked at yesterday or is it next week?
  7. Replies
    44
    Views
    3,334

    Have a look at the toyo mt and the new maxxis...

    Have a look at the toyo mt and the new maxxis razr mt. Toyo is a tried and tested tyre, strong sidewalls, resilient to punctures and well wearing. The new maxxis is making a name for itself as a...
  8. First why is this in the trip section? MB ...

    First why is this in the trip section? MB

    Also I wouldn't stress about it to much. Have a look at where the intake pipe is on the standard inlet manifold. Then see where your lower numbers...
  9. Replies
    44
    Views
    3,334

    https://www.tyrereview.com.au/tyre-advice/how-to-t...

    https://www.tyrereview.com.au/tyre-advice/how-to-tell-exactly-when-a-tyre-was-manufactured
  10. Replies
    44
    Views
    3,334

    Pretty much all the big name tyres will have a...

    Pretty much all the big name tyres will have a production date on them. Ask to see the tyres and you will soon know how old the tyre is. We usually receive stuff in Australia 2-6 months from the...
  11. Replies
    44
    Views
    3,334

    No difference Jay See. Tyre is only narrower. The...

    No difference Jay See. Tyre is only narrower. The diameter changes mathematically by 1mm.

    You will probably find it a little nicer to drive on the road.
  12. Replies
    13,647
    Views
    1,624,741

    Sticky: Here is a good link. ...

    Here is a good link.
    ...
  13. Replies
    13,647
    Views
    1,624,741

    Sticky: Yeah diesel produce a different gas. Hence you...

    Yeah diesel produce a different gas. Hence you need the correct tester when looking for head gasket cracks. The petrol types are looking for carbon monoxide to change colour while the diesel doesn't...
  14. Yeah we still use the old manual "plier" type...

    Yeah we still use the old manual "plier" type ones when we can't fit the fancy one in. We have a low profile ratchet type one as well. Although fancy is nice sometime tried an true is still all that...
  15. It is very cool. This is it here....we didn't...

    It is very cool.

    This is it here....we didn't pay that much for it. Stumbled across it on ebay for $500.

    https://www.toolfix.com.au/apex-air-rivet-nut-tool-m5-m12.html
  16. We have a proper unit at work which has much...

    We have a proper unit at work which has much longer threads. The unit also automatically unwinds out the nutsert. So you can put them in as quick as it takes you to screw the new nutsert on.
  17. Wait until you use a pneumatic rivnut tool. So...

    Wait until you use a pneumatic rivnut tool. So good.
  18. Replies
    481
    Views
    44,172

    Fixed.....

    Fixed.....
  19. Replies
    19
    Views
    931

    The performance curves are hard to find for td42...

    The performance curves are hard to find for td42 specific alternators. Maybe a very good auto electrc company could get them.

    Your observations are correct with the cable from the alternator ...
  20. Replies
    4
    Views
    411

    Part of the filler cap. Have seen it quite a few...

    Part of the filler cap. Have seen it quite a few times.
  21. Replies
    24
    Views
    1,257

    No you are right I was confused. It gets a little...

    No you are right I was confused. It gets a little hazy sometimes. I deal with tube and pipe at work and they are measured differently. I was right about the schedule rating though.

    So yes your...
  22. Replies
    24
    Views
    1,257

    Also check if their bars are adr approved. Airbag...

    Also check if their bars are adr approved. Airbag compliant etc etc. These details are what insurers will be looking at if you were to run into someone or something. No compliance no insurance.
    ...
  23. Replies
    24
    Views
    1,257

    40NB (40mm nominal bore) with a 3.25mm wall will...

    40NB (40mm nominal bore) with a 3.25mm wall will be 46.5mm OD ��. Nominal Bore tube will normal have a schedule rating and this is what determines the wall thickness.

    So if you want a 50ish mm OD...
  24. Replies
    15,455
    Views
    1,740,301

    Sticky: A full bowl of fruit loops for breakfast.

    A full bowl of fruit loops for breakfast.
  25. **Disclaimer** No bread makers were harmed during...

    **Disclaimer** No bread makers were harmed during this event.....
Results 1 to 25 of 1000
Page 1 of 40 1 2 3 4