Search:

you will have to take everything out including the threaded filler and the gas compliance plate in the engine bay for inspection...you will have to get it certified by a gas place that there is...

nothing in there for $140.00 ?...but there is a full length roof rack for $3500.00.if you are up for it....45 sold and only one left !!

good on you mate..always better when it is a team thing..no doubt everything around you seems better also...good to see you experiencing this time of year in a much better state of mind...cheers

buy truck mudflaps...they are cheap and you can just cut them to shape and they come in different widths

that's the part I just drilled out where it is pressed together and it comes off...I used screw head bolts to put it back on and ground the thread down on the back...when off I drilled a hole in the...

do you know where abouts you will be most of the time on the gold coast....there is a lot of accessories places there and spread out far and wide...the gold coast is a big area and isn't just surfers...

Go mostert

the gear inside the winding mechanism has stripped mate....(not the plastic gear for the motor )..check by using a hand winder on it from anything and if it will turn and the window doesn't move then...

they look better polished...50210

I thought it would have been quicker to just get the one off the back door ?

valve 0.38mm ...engine warm...plug gap 0.8-0.9mm points gap if carby 0.45 - 0.55 mm

It doesn't matter what size tyre you have !...they come off a 16 inch rim and leave part of the tyre exposed normally....I have one on a 15 inch rim with a 33 tyre....it wont matter what size rim or...

49113 58 pan..suicide shift , foot clutch ,vacuum advance on left lever...be prepared to work if you ride this

49112..one horse power

don't forget to solder the joins mate because this is an area where you will have most interference with any wiring ....also the reverse wires are already there for both sides they will be the only...