Search:

This is a poster made up of 23 photos I took on the trip. I do a poster each year we go away.

88960

Been a while since any work on the truck. I loaded up the truck for a trip next week and found the rear is dropping again, unsure if its the overall weight or too many cans in the fridge, but anyway,...

Since no one posts in these forums on these old threads, I thought I would give an update in 2025 on this problem to help anyone else out. It took me 3 nights of like 6 hours lying across my ute...

Here’s a Google translate of the request:

I'm just trying to find a workshop manual for my patrol with a 4.28 engine thanks

Made a false floor and fitted an old draw system I made the the GU over 10 years ago..https://uploads.tapatalk-cdn.com/20251127/b9897f25fb98114b83d1b2adaa092d71.jpg...

I am considering a Rugged Platinum 180 deg Awning. Its 2m wide from the car and a massive 6.5m long. Its got gas rams to assist with opening and closing the end wings. I will need to install with...

Advised the pads are on the way, have them Friday at latest. Part number for anyone doing the upgrade is Willwood 150-47-7416. They are a high friction, low temperature pad that is pitched at racing...

Finally got myself a stainless steel 4” snorkel and airbox from KINGFAB Kustoms and also get her some boots. Hopefully someone can show me around one day now that I’ve finally moved to the Sunshine...

I swapped over to Willwood brakes front and rear on the GQ when I did the chop. I also added hydroboost over the top, and despite having more stopping power, the result was quite knife edge and its...

The mechanic is probably correct.

I had an issue years ago where running the driving lights caused both fuel gauges to drop to empty.
If the camper was connected the main tank refused to show...

I'm Khudran from Saudi Arabia, thank you all for this wonderful forum.

This is a repost from my post about fuel filter change, but it applies here:

SOLVED - probably

I moved on to change the gauze filter in the injection pump. It is so small it was hard to tell...

Hopefully this will help some folks.

The stock Front Sway Bar End Links for my 2020 QX80 would be Moog K750146. These are approx. 3.125" long from the center of the bolt hole to the center of the...

Received an overdue reminder in the mail today for a parking infringement with all my details correct.
Bit of a surprise as I had not knowingly done the wrong thing - at least not with parking.
On...

Run Chrome instead, I never use Microsoft Edge.