The Ryco R2132P CAV filter is 15 micron too. But only at Beta 75, or 98.7% efficiency. Which means the filter will let approx one out of every 75, 15 micron particles to pass through the filter....
The Ryco R2132P CAV filter is 15 micron too. But only at Beta 75, or 98.7% efficiency. Which means the filter will let approx one out of every 75, 15 micron particles to pass through the filter....
Maybe Im biased but Ryco are just the expensive "cheap" filters. Fleetguard and Donaldson equivalents to the R2132P are 12 micron. I can't recall ever seeing a 10 micron CAV equivalent. The genuine...
Selectable (when driver chosen) front lockers for the win First Pooy Mate!
‘Most’ of our Trols rear LSD’s are as tight as a Nun’s..... and very near rear locked capable from stock for 90% of...
Probably not. I only commented on the E-locker 'cos that's the only locker I've ever used & that was what Mudnut had said he was saving for. That said I had learned before getting it about how...
Found these pics of when I installed mine. Been there for 3 or so years without a hitch. I have the earth of the pump connected to the oil pressure switch so the pump will only turn on when theres...
There is very little chance of a stone smashing the pump/filter bowl in my opinion. You could even use a PVC/ABS enclosure from Jaycar or similar to provide some preliminary protection. I would not...
mudski is probably a good starting point regards the config I would think. He sells a wide range of filtration gear and knows the detail better than most. Drop him a PM if he doesn't chime in.
My...
You bought a hybrid hyperflex kit, it will roll and dive. It's a characteristic of the hyperflex arms and off the shelf 5 links. This is largely due to the distance between the bushes at the diff...
You can't really 'over grease the bush' as such as it will only take as much grease as can be held by the voids/surface roughness of the elements or the clearance. You are simply reducing friction,...
Nice can of worms you have got there, the H bracket you are talking about is sold by Superior because they only supply a certain number of different length dropper arms. I also brought a Superflex...
That's the bolt spacing on the bottom of the radius arm for the sway bar mount the 'H' bracket bolts to their radius arm then the sway bar mount bolts to the 'H' bracket.
Hmmmm. I thought that "H" bracket was an aftermarket spacer that bolts to the radius arm to space the swaybar down.
What exactly are they asking? The distance from the swaybar link to the...
Flip the rear drive shaft. If you have gone for bulk travel you'll need to notch that crossmember too. I had to do that on mine and it'll still touch if everything is extended.
You'll notice that...
f@#kn air !!! i had a similar problem where i had air getting into the fuel - diagnosed with a piece of clear hose from the filter to the injector pump , anyway i solved the problem & stopped the air...
Easier to replace the tie rod end on the drag link. The GQ Pittman arm take the Drag link under and the GU is Over. And a different taper.