Search:

Thanks arwon and patrol2011 I look forward to hearing how the new chip goes

Hi all
I"m researching a power chip for the zd30 and have found a product called chip express, the figures look great the price is good ( $650.00 ) but can anyone tell me are they any good ?
Does...

boost is 12-13 at 2000rpm max is 15-16 at 3500rpm or is the turbo spooling up to quick ?
all new to this so not sure if the dawes and needle valve is set up correctly.

Hi
Can anyone tell me what temperature I should have on my pyro gauge ?
running a zd30 3in exhaust with dawes and needle valve egr blocked and a auto.

With a load of 3 tonne pulling up a hill ,...

no definitely oil ! just took it for another drive and still a slight smear of oil in the pipe .

Hi Guys

just fitted a dawes n needle valve and 3in scotts rods exhaust and have noticed a small amount of engine oil at the tip of the exhaust pipe enough oil to cause a drip.
the car is a 3ltr...

Hi Guys
I tow a 25ft van 2.5 t the only issue I have is lack of power going up any sort of hill making some mods to overcome this issue. fuel economy is about 660km from both tanks towing and...

Thank you to all new gauges coming from the states

Thanks Tony
ebay surfing again for gauge

Hi everyone

Can anyone recommend a good boost gauge, boost or mechanical ? and has anyone had or heard about scottsrods exhausts in Ipswich ? good or bad.
currently gathering bits to block egr ,...

Thanks everyone. the chassis has a 1 metre stretch and was done by creative conversions at Brendale in Brisbane . The car was made to fit a 2 metre long tray basicaly they cut the back off a wagon...

Hi everyone.
I have a 2002 gu 3lt auto that is stock standard and has done 94000 km, but needs more giddy up n go,
my question is should I block the EGR valve first or fit a 3in exhaust first or...

some photos of the beast

Thanks Tim pictures up

Thanks guys just trying to load pics now but it won't let me, I can drive a car but not a computer.