Search:

Well i am going......

I had something similar it was a stone between the disc and backing plate.

This has become the fully shick bro oh my god sheriously thread .

When i did monza seats i used a 10 mm thick plate the one in the center of the pic below to level them out.
http://i567.photobucket.com/albums/ss117/it250k/patrol061.jpg

If anything like mine the...

I would say you need a fair bit more fuel mine was wound in before i even fitted the turbo then i wound it in even more .


I had to turn the idle screw back out a fair bit as well once i wound...

looks a little like a condensor near your coil usually i think lol it's been a while.

All done now will give it a bit of a test tomorrow and see how noisy it is.

The plate i used to level out the seat was 10mm thick other then that no but if you look and compare bolt holes etc it will give you a rough idea and make it a bit easier..

If your recovering a monza seat i would recommend trimming down the side supports as they get crushed real quick getting in and out.
I made some brackets and took pics it will give you an idea...

gy and sb green yellow sky blue go to the speedo

Yes of course i do the dices on the mirror took 2 seconds off my 3 minute quarter mile.
But the fancy blue wiper arms gave me 5 seconds.
by chroming the grille i was able to achieve a 2.50 minute...

Double standards i think ab should do the right thing and take away their privileges altogether and give them all a 2 week ban lol

:animierte-smilies-f:animierte-smilies-f:animierte-smilies-f:animierte-smilies-f Oh my god whats next bro a fully sick lowered patrol with 22 inch chromies seriously.

I think growlers is preparing himself for owning a gu .

Does it have point's or pertronix ? if points it may be the condensor and points just replace them with a pertronix anyway money sell spent.
Try disconnecting the noise suppressor.
Check for any...