Missed it. 4.30 they shut.. And it's for a zd30 Di.. I've got a temp fix on it, hoping I have a spare kit at home.. (Nowra)
Type: Posts; User: Dave_GU_ACT
Missed it. 4.30 they shut.. And it's for a zd30 Di.. I've got a temp fix on it, hoping I have a spare kit at home.. (Nowra)
I need a gasket (rubber o ring) for the oil filter asap.. Like right now
Yep.. That's what i was thinking.. So I asked the brains trust and you've just confirmed what I was already thinking.
Also wanted to say it's not always using coolant at that rate.. Sometimes it's a lot lower
I've looked for that too. Hard to tell with such a small opening and I don't believe I can see the bubbles.. Not like the old days of old holdens and fords eh? Lol
Its also sometimes hard to start.. If left for a little while
It still runs like that. Idle produces no odd noises or loss of pressure, just a sweet smell..
Can't say it is? Under idle or load?
All, I'm having a think about a problem my 2002 guiii 3.0 Di is having. I'm using coolant at the rate if about 4l per 400k. There's a sweet smell at the exhaust and there is no visible leaks of...
I got the colours here, plenty of them.. It's a real easy job.. Dash facia out.. Then dash.. 6 screws total. Drop the wheel then undo the 2 screws under the top of the facia. Remove by stretching the...
Turn your hazard lights on. Listen for the clicking sound.. Locate the square box approx 2cm cubed.. Put your head under the dash to the left of the wheel. It'll be under the dash on the drivers side...
No, but you will need a "no load" electronic flasher can.. Otherwise they flash fast.. Don't go the resistor route, that's just stupid..
Yep on order from brightlight auto. I only use them. Even though they are a little on the dear side, their lights are very good as the Chinese ones aren't very bright.. When it's dark I'll take a few...
I got a loom from the rear of a falcon sedan and put led globes in them. Used a hole saw to make the hole then used a semi round file to just make it fit.. Was pretty easy then wired it in from the...
Converted the rear lights to led. I've done the Xmas tree conversion and all lights are now led.. Looks great.. Just need to get the front parkers done with dual brightness t20 and I'm done.