Search:

The clutch bearing spins all the time, is the noise there all the time? Mine will make a noise when you start the car with the ac on then it goes away.

When you put the master cyl on did you check the clearance on the pushrod? If your clutch is slipping it's either the clutch fork is starting to engage or the friction material is starting to slip,...

68771

And the engine oil temp

68770

Fuel filter water trap and glow plug timer.
You petrol people!

I use 2 of the squat 25 lt ones so I can stand them up or lay down if I wish, use ratchet straps to tie down as cam straps won't get tight enough,
As Darren mentioned tighten lids with grips and I...

I find my clothes get caught in the exposed wheel types, cardboard works well too

Your last resort is the winch, snatch recovery are light recovery only

Yep $900 bucks simpler, unless you can get 2nd hand

I would suggest using gear that can be also used for a recovery that way your not carting single purpose equipment

Fill em with water and give it a try

Easiest way to remove cable from unit without removing cable from car is to pull cover off after manipulating unit from bracket (yes it is a Bugger to do) once out cable and rod can be removed.
...

Not a bad idea, we put cooper in the ft room of our house, got heaps of traffic noise he can now sleep anywhere

sleeping baby?

It's just going to be noisy for the kids/missus sitting in the car whilst you pump up in the rain etc

Are you sure?