Search:

You can re-use them. Just make sure you push the pin through in the direction the arrow indicates on the hammer lock. There is usually an arrow on the locking collar in the middle of the hammer lock.

When it's installed cover it with silicone. It should never come off then unless you want it to.

Looks good. It's been to long since I have been down there need to try and get serious about bringing the family down.

Picked myself up a new chook chaser last weekend. Should be a but of fun. Have been off the bike for 2 years. It's a 2017 Sherco SE-R300 two stroke. International six days enduro edition. 84567

Just a thought but do the ovens require a clear air gap above them for venting any heat etc? Might be something to double check before using it as a storage area.

The duty cycle is normally stated over a 10 minute period. So at 60% it would run for 6 minutes and need to rest for 4 minutes. It could even switch into a thermal/overload protection during this...

A lot of gasless needs the polarity to be reversed. So the electrode into the negative and the earth clamp into the positive. This will help to settle it down and make it run smoother for you. But it...

Are you using gasless wire in a mig or stick welding?

I'm usually up most nights at this time. Just finishing sorting some gear out for moreton on the weekend.

I should really get better organised and go to bed earlier.

Absolute Bastard. Don't know if I can come here anymore, to depressing. Maybe I'll try and get a Y63 before you.....

MudRunnerTD have a look at places like BOC and RS components. They are usually pretty well priced for f clamps and other types of gear. There are a lot more companies now where all this stuff can be...

I like how you have your own forum handle on your whiteboard in the shed. You big man child....

Put some weld in the hole in the chassis then die grind until the push is a tap in fit. Unlikely that bush is worn the hole in the chassis will be.

Videos never do these things justice. But the 2 little boys giggling does....

Oh there was more to it lol.

Thats the easy part. The headers take a good part of a day to change. They are a bastard.