Search:

Take your time on ensuring closer rivets in the curves mate, minimum 100mm on curves and maybe 150mm on straights.

Stupid new phone won't let me do multiple photos.... My car is a bit...

and washers on the rivets too mate, it works a treat!

No open exposure to rust, no screw ends under the flaps. I always need to get my hands under there when cleaning mud and its a nice clean...

Different manufacturers measure them differently its a pain in the ass really but not much we can do.

They look similar to a bfg at through the middle.

I don't think it would work only using the existing holes mate.

Oem flares are a hard compound and flexy flares are a lot softer.

You could try it out but I reckon you'll have sagging between...

Disregard, just read your other thread

Got a set of these on the work Navara. I reckon they're petty good. Very good value, got about 60 thou out of the last set too. They seem to work well on the road too with only a little bit of...

Why do you want spacers? You would be far better buying a larger offset rim to suit your needs. The logic for the increased load on the bearings occurs from the counter lever of the offset, this is...

Lookin good Parsky

I so hate when this thread pops up on the "whats new"

Go on, you be the first one to do it!!

and now ill mention that you need to disconnect the aac valve(puts ecu into base/diagnostic mode) to set the timing otherwise it will be approx 5deg retarded from where it should be

You can do it in a lathe, use a torch and do it by eye or the best method is to make a bar that goes all the through the housing inc the centre and uses bushes/discs that slide onto said bar and into...

Yesterday bruce went on his first proper 4wd since becoming a diesel and my first 4wd since May last year.

Went out with George and Matt and did some bloody tough tracks.

Matt has a bunch of...

Not a great deal has been happening over the past weekwith the patrol, got the LS1 running with the mafless tune, threw some 10.5mm eagle ht leads on, adjustable panhard rods have been installed...

ahhhh now I see what you mean by stone guards......... my apologies Parksy

I'm really finding this thread depressing :(

Think I might have 2 put my MOD hat on and accidentally delete this thread.....ops did I just type out what I was thinking! *L*

And yeh the shocks...