Search:

Just curious is there a forum member that could make up stickers for the rear of our trucks with the warning that a lot of us have adopted in our signatures (thanks to who ever started it) i would...

Will do Cliff tomorrow will be a good day for it im stuck at work on flood watch

Its RDF4 Have attached the link it gives air and oil for most makes of cars
Take aLook here...

I was on the phone today with 4WD Victoria about organising a driving course for my work and the guy i was talking to was telling me that there has been 13 deaths related to snatch straps being...

Ive got the davis graig adjustable temp sender unit the sender slides into the top hose with the controller mounted near by it you can see the controller in a couple of the pics i think i have the...

Ok job finally completed except for the cab switches as for power gains didnt really do anything to brag about except it seems a bit smoother
temp sits where it always has well under half have...

cut the holes and the fans mounted have sealed all around the fans and got the wiring in place and most connected will fit all the hoses and fill the system with coolant in morning and give it a test...

Started the twin thermo conversion on my 2.8 have removed the clutch fan and my son has made up the alloy shroud will be using twin thermo set up out of the EF-EL Falcon plan is to have them setup so...

Bazzad
To thicken our mattress and make it more comfortable we used a double bed size egg shell foam mattress thing they will actually fit inside the original cover with a bit of swearing and effort...

have a look here i had starting problems and did the fix mentioned above posted up pics and a general guide of how to fit...

this is the filter removed after 12000 ks this is the dirty side before doing the egr block and catch can the filters were useless after 5000ks and needed throwing out

Ben81c my car runs an ome suspension with remote nitro charger cylinders giving it a total of a 2'' lift has no spacers or body blocks etc i ran these 35s for a couple of years without scrubbing or...

Havea look here http://www.nissanpatrol.com.au/forums/showthread.php?7013-Gu-2.8-hot-start-issue ive recently fixed my hot start problem and posted some pics how to do it hope it helps

heres mine with 2inch lift and 35s i had no problems running these tyres on my gu

Here are the hose codes for any one that needs them these are Mackay hoses available from Super cheap
Suits Patrol rd28 6 cyl 2.8 T/diesel 10/97-4/2000
Top hose - CH2291
Bottom hose - CH2292...