16th December 2018, 03:49 AM
This is my beater named Lady luck,I am trying to post a picture and i am going cracy.
15th December 2018, 10:18 PM
Sounds ok.
Just be aware of the need to check battery fluid regularly. Suggest weekly to start with until you know what is required.
That charger will take the battery to 100% charge when the...
15th December 2018, 02:24 PM
Hi ET, I realised that when I saw your response, just after I posted mine. Have since added an edit to mine in the hope of avoiding confusion. Suspect it’s a cheap ‘dumb’ charger, although I did...
15th December 2018, 02:03 PM
14.4v is OK & tells you the charger is doing its job.
14.4v is the voltage the charger should take the voltage up to on a wet or AGM type battery By only reading the voltage it is hard to know...
3rd December 2018, 09:02 PM
There is a low profile Unistrut avail that is 41mm wide x 22mm high. Brackets can be sourced from a number of roofrack places, and all you need is an adapter to tie the two together - a bit lower...
3rd December 2018, 07:12 PM
Alex, as you have glued the module down, guess it will stay (no air gap), not the best for cooling but they also can get pretty hot mounted to an iron roof (shed or house).
Think of maybe...
29th October 2018, 11:15 AM
Just checked, plug in both....
29th October 2018, 11:12 AM
Not sure myself mate but I assume there would be. Use a little mirror and check. Is it from the block or head you think?
29th October 2018, 07:38 AM
The water is not coloured like coolant should be. I take it you just top it up with plain old water? Anyhow a leak that bad looks like a welch plug to me.
28th October 2018, 09:02 PM
What's the story? Welch plug, garden hose left on under bonnet, fire suppression device????? Hope its not a major for you to resolve.
26th March 2018, 07:48 PM
Now I know The Patrol is programmed to autolock the doors if you press unlock on the remote or unlock via keys but you dont open the doors in 30 seconds.
Now this leads to a common problem.
...
26th November 2017, 10:27 AM
OK - I had this very same problem. When I bled the LPV it also had "black shit" in it which indicated it had not been bled for a very long time (if ever) and as a result the piston had seized,...