Search:

Dhuck I agree with nipagu7 the best option upfront is to get a ECU remap which if done well will turn the EGR fuction off and technically it is not then required to physically use the EGR blanking...

Is that next to the bilge pump Darren? :0

I have mine mounted under the drivers seat. I actually used double sided tape and mounted it on top of the Nissan Factory Heating vent that points to the rear passenger feet. It has been there for 10...

I mounted my base in the centre console behind where the cup holders sit (hidden inside), i drilled holes for the factory speaker to "vent" (so no need for a external speaker) and ran the handset...

I have a Uniden 9080 under the passenger seat. And I ran a LAN cable to one of them flash mount sockets for the hand piece which sits just to the left of the steering wheel.

I have two "hidden" UHF base units, one is under the passenger seat (hope I don't get stuck in deep water!) the other is behind the glove box, the cross bar that supports the dash is where I cable...

Mine is under the centre console. Then a remote speaker mounted just below the heater controls.
The only pic I have on me sorry.
80822

If you haven't bought a catch can yet, have a look at the flash lube pro. They are a bit more compact than the provent.
https://www.flashlube.com/en/products/catch-can-pro.html
This is what I...

Couple of more (Use FMIC these days):
1. As mentioned, used same existing vert brkt adjacent to ABS but located CC fwd next to aux battery (Current CC install position is where large rotary switch...

My current install might suit ie: used an existing vertical plate brkt that comes off inner guard, adjacent to ABS (just fwd). Used 2x50mm pieces of angle(each approx 150mm long), mounted one angle...

79467

Here you go Dhuck, made up a bracket and used existing bolts.

Damn, no idea why it's upside down (must be iPad)

Recently noticed my fuel pump leaking, have learnt that is common problem with CRD. Good idea to have a look prior to pick up.

Go under vehicle look up from drivers side (of block), just past...

Looks great mate, would love to have a tourier one day myself!!!


Sent from my iPhone using Tapatalk

I can second that, the best thing I've done to my Patrol is the needle & Dawse valve, made it so much more pleasant to drive.

Good approach. Have tried a few different configurations (if I can help). Must say the first mods I did (3" exhaust & manual boost control) provided significant performance gains.
Would get EGT /...