Search:

NISSAN GQ4.2, we did the track called Daniels Point Road, well we were told it was that track by a local, didnt know what to expect, fantastic track, dont know the area well at all

you dont need the front one anyways, good shocks will do the job just as well

make sure you fit an original Nissan belt, similiar price to aftermarket but wont give you grief, aftermarket can be a couple of mm bigger or smaller but play up, x 2 on the alternator although this...

as long as it is genuine it will stay that way

are you yalking about the bearing caps to the wheel bearings or the swivel hubs? wheel bearings are easy, screw driver & a hammer, swivel hubs nor so easy unless you remove the entire hub, again...

just something to think about, I have removed 1 pad when the piston was jambed, part brake was better than no brake, got me home without cooking everything, possibly the same here but they never got...

Hi all, after some issues with my 02 3L GU I have decided I had better sort this out, I am losing power under exceleration periodically, usually 3rd or 4th gear, It blows severe white smoke on...

Malcolm, tedious is good, this helps others out that are not so determined as you are, so many issues have the same noises/problems etc that it is often hard to know exactly what the issue is, trial...

good onya Nissannewby, this forum still works well

if you're worried about shavings when doing any drilling, punch the centre for a mark, cover area to be drilled in a little vaso & all shaving are caught in the mixed, simply wipe clean on completion...

you can pull them apart, remove the seals & spray the entire unit in non-coustic oven cleaner & leave for a few hrs or overnight, using a scotchbrite scourer (usually a white scourer) & a toothbrush...

I have always been a firm believer in anything with brakes, replace it, I would tighten the nuts up then clean it up 100%, have someone pump the brakes a few times with the engine running to get the...

you inherited a great beast mate, it is more than likely the arse end sagged out & he beefed it up a little, I dont know the spec for hieghts but they are on here, if immediately concerned measure...

guys I have seen the after affects of rod holders on a person, his stomach was scooped out like it was a icecream scoop x 4, the guy walked infront of the vehicle, said vehicle was doing 20kph, the...

doesnt sound like bearings to be, get him to check all the bushes as well, certainly have the bearings repacked if they are a little loose