Search:

Welcome to the forum mate, feel free to ask any questions and join in the conversations.

welcome aboard mate liveing the dream of many on here

G'day - Welcome aboard join in when you are ready and have some fun ! plenty to do and see and if u have any problems just ask and im sure u will get an answer !! Bucket loads of usefull information...

Welcome Mate. You should not go wrong with a 4.2 to get you around this wonderful Country. Join in the conversations and enjoy the Ride

If you can get the film off all you need is a scraper from bunnings (the one you put blades into yourself) and get a spray bottle and mix some dish washing liquid and water, spray the glue and let it...

ammonia trapped under cling film and left for a while used to be the solution.

It could be that glue and film has changed since then as that comes from the 'early days'.

ok had a shot at it thisarvo and no worries.There seemed to be two layers to the tint.
The first layer came off just by getting a blade under it and peeling..no probbs.
The second was a little bit...

This is what I used. Just be careful with it.

Tappa tappa

Metho and acetone based products are too volatile and evaporate quickly meaning the area dries before you can remove the adhesive. It's better to use a wax and grease remover or goo remover as said...

Hi, there are a few correct answers and good information printed above.

In Queensland you do not have to get a suspension lift approved.

You will find that the legal lift (after doing your...