If a manual more than likely 4.1:1, if auto 3.9. There should be a silver placard under the bonnet that will give you an axle code. The last numbers of the code will be the ratio. Eg mine says hg41,...
If a manual more than likely 4.1:1, if auto 3.9. There should be a silver placard under the bonnet that will give you an axle code. The last numbers of the code will be the ratio. Eg mine says hg41,...
Gday all It's taken me a while but hopefully the photos get uploaded with this post.Thanks Tony
If anyone has a Commonwealth Bank Debit Card I suggest you check to see if you are wrongly being charged 'Debit Excess Fees'..
We use our card only for online purchases, always depositing just...
You'd probably be surprised how many tow bars are mounted
using bolts that are not zinc plated or rated.then the amount of times those bolts
get wet either by bog holes,puddles or mud even and...
Yeah OK, I went a bit over the top with my post. The several glasses of butterscotch schnapps around the camp fire a short time before may have had some influence! I guess if I had thought about it...
Hi Scotty,
I did have a look at the link. I'm not sure what size cable blkwdw has. Going by the amperage rating he stated, I guessed he has 6 & 8 B&S.....the cable won't fit into the circuit...
Auto's work using hydraulic pressure to actuate the friction plates. The pressure is derived from a pump generally mounted on the input shaft directly after the torque converter. Without the motor...
It's recommend to fuse due to the length of the cable and where you have to run it.
If you put the cable in conduit and have run it through the vehicle in a way that reduces the risk of it rubbing...
No problems with the porta jump, maybe a dud, dont know!
The lock up solenoid allows fluid to travel in a more direct path thru the valve body to create lock up that acts like a 5th gear!
If you lock the converter on idle it will over load the motor...
the "lock up" is created by a solenoid. Wholesale automatics, which manufacture a kit for manual lockup (which is just a bypass switch) say that if you accidently leave the switch locked and try to...
No inside the converter there are fins that the fluid pressure push against to creat the lock up so if the motor is not turning the transmission pump wont creat the pressure to lock the converter to...
But a lockup switch locks the drive through the torque converter.
With the TC locked the vehicle will stall without enough revs.
I think there is a possibility although I've heard that if you...
No coz the auto uses fluid pressure to engage drive thru the valve body and not mechanical friction like a gearbox!
Increase the Forum Sponsorship and move the manuals so that only Forum Sponsors have access to them................one of the main reasons that I have given up welcoming new members, is that some of...