Search:

Check with a straight edge that the pulleys all line up, if the new alternator sits 1mm rearward or forward it will cause a squeal.
Also, how much lube is on the belt? Too much will cause a...

Proportioning valves and brake fluid pressures are definitely worth looking into, but I don't know if you'd feel much difference from swapping drum to disc...
Drums have good stopping power as they...

The torque convertor is only a component of the transmission, equivalent to a clutch on a vehicle with a manual tranmission.
As stated before, the failure could have been caused by imbalance,...

You don't need to remove the 'Patrol' badge section to access the screws. Unfortunately my car is not nearby to take a photo....
The screws are fairly large philips head screws that (from memory)...

Yeah ZD30, I saw it advertised at a dealer with ~250,000km and thought it was a bargain so I went to have a look. When I got there the salesman said "this engine's only done 250,000km"....
I looked...

As far as km's go...
I've driven a GU with 700,000km's, it surprisingly drove very well! It had a couple of issues like the drivers door hinge had dropped a bit but I was very impressed.
Obviously...

This is my current toy:
http://i160.photobucket.com/albums/t164/gordy308/64912_10150091810873327_721708326_7257794_7934155_n.jpg
1966 HR Holden Special
58,000 miles, original unrestored condition....

The ZD30 has an 'automatic' belt tensioner with a little shock absorber. It sits next to the water pump from memory.
If you have belt squeal it could be caused by the belt (worn, or stretched, or...

Get on to this guy:
www.onautos.com.au
He sells heaps of brake pads, rotors, etc at good prices and is pretty switched on! He'll point you in the right direction.

Hi Col,
I've fitted the ASE intercooler, it's a bit bigger and thicker than the standard unit. It's also got a fan underneath which pulls heaps of air.
I've got some pics in my "Bear's GU ST...

I've been to Ian Rose Motors in Moorabbin, they seemed a pretty good mob.


---
I am here: http://maps.google.com/maps?ll=-37.845479,144.946597

I ended up getting the superior engineering links, my thought are:
- they're pretty fiddly to disconnect & even moreso to reconnect.
- the difference in travel with the sway bar connected compared...

So here's a couple of the pics from last night, finished up at about 12:15 after fitting the intercooler, catch can & drive belt tensioner (which I picked up for a steal on ebay :clapping: )
...

I've also got a GU without cruise control (mines a ZD30), I have wondered what would be required to fit it...
I have a bit of knowledge with this sort of thing but with different manufacturers...

Hi All,
Just thought I'd let y'all know that I ordered one of these centre caps to suit GU's with factory alloys:
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=260816311609
I received it...