Search:

Yeah only just the handbrake, how many clicks till handbrake stops??
check fluid? my bad

i have a 2008 3l and i also had a fitter braze the the fitting into the intercooler pipe in the bend (turbo side) cost me $20 then just ran the hose through the fire wall drivers side and to power it...

I drilled and tapped a hole in the outlet side elbow from the intercooler, as this best represents what pressure is going into the engine.

Didn't do mine but think it has a hole tapped on boost side of intercooler, better check as not 100%.

I didnt tee into any vacuum lines. None seemed to give a good reading so I brazed an elbow into thepipe on the inter cooler. It works good.
Go here and have a look:

I'd also look into the Eaton E-locker if I were you. Just get a price at least.

Out of those two I would go with TJM.

Yep................5gig and its sittin on my lap top waiting for me to something intelligent with it.

Still have not found an updated Australian catalogue since the one in the first thread, not...

so you mean off the bitumen

0.5 L of any old oil on asphalt under car on parking gives you a few happy minutes to watch how the owner trying to find where it is leaks from.

Do yourself a favour and get a dynema or same sort of rope you will be amazed how good it is to use.

I have a brand new steel rope in the shed that came off the winch when I got it, synthetic went...

rule of thumb and i should heed his as my rope needs to be replaced ,,,, any kinks and squashed rope needs to be replaced if it is towards the end of the rope nearest the drum and your not running it...

Mate it needs to be replaced. If there are any broken strands, bird nesting, kinks, squashed flat sections there are also measurements you can take and its under a certain diameter for the specific...

Mate, I know nothing about winches, never owned one, but looking at that bottom pick, I would get rid of it.

I assume by the last pick the wire has frayed?

Damn u Biscuits, now I'm going 2 be sitting watchin dirtbikes on Youtube all night :):):)

We have been given a great document from Aksniss who has compiled a reference document for Nissan Patrol 4WD's.


The document started as a ZD30 issue document but has since grown to be more of a...